Snorkel POP UP EC08 - Manual (Page 14)

Emergency stop
An emergency stop button is provided on the control pendant.
Once depressed, this isolates power to the raise and lower functions.
To restore functionality, twist the emergency stop button clockwise to release
the button, as shown below.
Turning the Power Selector to the ‘0’ position also has the effect of isolating
power to the raise and lower functions.
Emergency lowering
1. Pull out Plunger ‘A’ and rotate through 90 degrees.
2. Turn valve ‘B’ anticlockwise until platform starts to lower.
To stop the platform at any time, turn valve clockwise
until platform stops descending.
3. Once platform has descended full
4. Also ensure that the plunger valve is reset before operating, see
instructions for plunger valve resetting.
y, please ensure valve ‘B’
is closed off by turning clockwise.
Section 4
OPERATING INSTRUCTIONS
Page 13 of 25 Operator’s Safety and Maintenance Handbook (
Plunger ‘A’ Valve ‘B’
Pop-Up+ dual use machine rev.0.0.1.0210)
0120723