Lanyard anchor points 7-5, Platform gravity gate 7-5, Platform guardrails 7-5 – Snorkel MHP34J User Manual
Page 41: Flashing light (option) 7-5, Flashing light, 7-5, Light flashing, 7-5, Lanyard anchor points, 7-5, Boom welds, 7-5, Daily inspection and maintenance
Pay par tic u lar at ten tion to the chas sis welds
Figures 7.17 - Boom Welds
Closely in spect boom welds all the way around, for
cracks.
■ Lanyard Anchor Points
Figure 7.18 - Lanyard Anchor Points
Vi sually check the lan yard an chor points to see that
they are not de formed or cut off.
■ Platform Gravity Gate
Figure 7.19 - Platform Gravity Gate
■ Platform Guardrails
Figure 7.20 - Platform Guardrails
Vi sually in spect the plat form guard rails to see that
none of the tub ing has been cut out, re moved, or
de formed in any way.
Vi sually check the guard rail welds to see that none
is cracked nor ground down.
■ Flashing Light (option)
Figure 7.21 - Flashing Light
Vi sually check the op tional flash ing light, to see
that the light flashes at ap prox i mately one flash per
sec ond when the mo tor key switch is turned on.
MHP12/34J – 11447A
page 7 - 5
7. Daily Inspection and Maintenance