Safety devices, Safety device information 2-1, Emergency stop switches 2-1 – Snorkel MHP34J User Manual
Page 17: At ground control box 2-1, At platform control box 2-1, Other safety devices 2-1, Lanyard anchor points 2-1, Other safety devices, 2-1, Emergency stop switches, 2-1, Lanyard anchor points, 2-1
2. Safety Devices
■ Safety Device Information
For emer gency op er a tion con trols and pro ce dures,
see the “Emer gency Op er a tion” chap ter 9, in this
man ual.
The de vices listed in this chap ter are safety de -
vices.
They are on the MHP12/34J to in crease safety in
the work place for both the op er a tor and other peo -
ple near the MHP12/34J.
DO NOT by pass, disable, modify, or ignore
any of these devices. Check them carefully
at the start of each work shift to see that they
are in working order (see “Daily Inspection
and Maintenance” chapter 7). If any is found
to be defective, remove the MHP12/34J from
service immediately until a qualified service
technician can make repairs.
■ Emergency Stop Switches
❑
At ground control box
Figure 2.1 - Emergency Stop Switch at
Ground Control Box
Press the
EMERGENCY STOP
switch cover
down, at any time, un der any con di tions and the
en
tire ma
chine stops, and noth
ing moves. This
emer gency stop switch cover must be up and the
switch turned on for any thing on the MHP12/34J to
work.
❑
At platform control box
Figure 2.2 - Emergency Stop Switch at
Platform Control Box
Press the
EMERGENCY STOP
switch cover
down, at any time, un der any con di tions and the
en
tire ma
chine stops, and noth
ing moves. This
emer gency stop switch cover must be up and the
switch turned on for any thing on the MHP12/34J to
work.
NOTE:
The ground control box is designed to override
the platform control box. If the platform control
box EMERGENCY STOP switch is down (off) the
ground con trol box can still be used to start and
op er ate the MHP12/34J.
■ Other Safety Devices
❑
Lanyard anchor points
Figure 2.3 - Lanyard Anchor Points
MHP12/34J – 11447A
page 2 - 1
CAUTION