Snorkel EPV16J - Manual (Page 17)

Chapter 2. Safety Devices
■ Safety Device Information
For emer gency op er a tion con trols and pro ce dures,
see the “Emer gency Op er a tion” chap ter 9, in this
man ual.
The de vices listed in this chap ter are safety de -
vices.
They are on the EPV16J to in crease safety in the
work place for both the op er a tor and other peo ple
near the EPV16J.
DO NOT by pass, disable, modify, or ignore
any of these devices. Check them carefully
at the start of each work shift to see that they
are in working order (see “Pre-operational
Inspection” chapter 7). If any is found to be
defective, remove the EPV16J from service
immediately until a qualified service
technician can make repairs.
■ Emergency Stop Switches
❑ At ground control box
Figure 2.1 - Emergency Stop Switch at
Ground Control Box
Press the EMERGENCY STOP switch cover
down, at any time, un der any con di tions and the
en
tire ma chine stops, and noth ing moves. This
emer gency stop switch cover must be up and the
switch turned on for any thing on the EPV16J to
work.
❑ At platform control box
Figure 2.2 - Emergency Stop Switch at
Platform Control Box
Press the EMERGENCY STOP switch cover
down, at any time, un der any con di tions and the
en
tire ma chine stops, and noth ing moves. This
emer gency stop switch cover must be up and the
switch turned on for any thing on the EPV16J to
work.
NOTE:
The ground control box is designed to override
the platform control box. If the platform control
box EMERGENCY STOP switch is down (off) the
ground con trol box can still be used to start and
op er ate the EPV16J.
■ Other Safety Devices
❑ Lanyard anchor points
Figure 2.3 - Lanyard Anchor Points
EPV16J – 11089A page 2 - 1
CAUTION