Snorkel EPV16J - Manual (Page 15)

EPV16J – 11089A page 1 - 7
Chapter 1. Safety
CAUTION
SAFETY BELTS WITH
SHOULDER STRAPS OR
SAFETY HARNESS ARE
TO BE USED
9928
SWL 200 KG
2025-200
LOWER
BOOM
UPPER
JIB
BOOM
ROTATE
LOWER
BOOM
SPEED CONTROL
SLEW
11420 - 1
LIFT
ENABLE
CHOKE
EMERGENCY
PLATFORM
EMERGENCY LOWER
TO LOWER PLATFORM, OPERATE EMERGENCY
LOWER SWITCH.
1.
2. TO SLEW BOOM, OPERATE ‘EMERGENCY
LOWER’ & ‘SLEW’ SWITCHES TOGETHER.
WARNING
KEEP LINES CLEAR POWER OF
Unless the Electrical Supply Authority has advised
in writing otherwise;
the clearance between any live overhead
power line and any part of this machine or
load carried is required by law to be
AT LEAST 4 METRES
This is a requirement of regulation 93 of the
Electrical Supply Regulations 1984
in the interests of safe working.
DANGER
BEWARE OF ELECTRICAL HAZARDS
REGULATION 133A OF THE
CONSTRUCTION SAFETY ACT 1912 REQUIRES
(a) Minimum approach of an appliance
(b) Inspection of the work site for
(c) Constant vigilance and an observer required
to live electrical apparatus.
electrical hazards before
commencing to use the appliance.
whilst working or travelling the appliance
in the vicinity of live electrical apparatus.
3m. for voltages up to 132,000
6m. for voltages above 132,000
and up to 330,000
8m. for voltages above 330,000
(New Zealand Only)
(Australia Only)
Attach lanyard
of fall restraint
to loop below
0150448