Snorkel XRT33-sn2300+ANSI - Manual (Page 9)

Page 9 XRT Work Platform
A FTER U SE E ACH D AY
1. Ensure that the platform is fully lowered.
2. Park the machine on a firm, level surface, preferably under cover, secure against vandals,
children and unauthorized operation.
3. Turn the key switch to OFF and remove the key to prevent unauthorized operation.
P ARKING B RAKE R ELEASE
Perform the following only when the machine will not operate under its own power and it is nec-
essary to move the machine or when winching onto a trailer to transport.
Figure 7: Parking Brake Release Pump
1. Close the Needle Valve by turning the
knob clockwise.
2. Pump the Brake Release Pump until
the parking brakes release and the
wheels can be turned.
3. The machine will now roll when
pushed or pulled.
4. To re-engage the brakes open the
Needle Valve and verify that the park-
ing brakes have engaged before the
machine is operated.
NEEDLE VALVE
BRAKE RELEASE PUMP
W A R N I N G ! !
Never operate work platform with the parking brakes released. Serious injury
or damage could result.