Snorkel XRT33-sn2300+ANSI - Manual (Page 7)

Page 7 XRT Work Platform
L OWERING THE P LATFORM
1. Turn the Lift/Drive Switch to LIFT.
2. Engage the Interlock Switch and pull back on the Control Handle to lower the platform.
E MERGENCY L OWERING
Figure 5: Emergency Lowering Valve Knob
The Emergency Lowering Valve is located at
the rear of the machine at the base of the
scissor assembly.
1. Open the emergency lowering valve by
pulling and holding the knob.
2. To close, release the knob. The platform
will not elevate if the Emergency Lowering
Valve is open.
S WITCHING F UELS (D UAL F UEL O NLY )
1. With engine running turn the fuel selector switch to the center position (Figure 1).
2. After the engine has quit running select the appropriate fuel supply.
3. Restart the engine.
W A R N I N G ! !
If the platform should fail to lower, NEVER climb down the elevating
assembly.
EMERGENCY
LOWERING KNOB