Snorkel X40RT - Manual (Page 55)

10. DAILY INSPECTION & MAINTENANCE
10 - 5 P/N 569300
10. Battery terminals
Battery terminals should be clean and free of
corrosion.
11. Hydraulic tank cap
Check to see that the cap is in place and is tight.
12. Hydraulic oil level
To check the hydraulic oil level:
Completely lower the platform.
The hydraulic oil level should be at the full
level.
If necessary, add hydraulic oil at the Hydraulic oil
tank cap. See the “SPECIFICATIONS” chapter
for type and grade of hydraulic oil.
13. Hydraulic oil leaks
D A N G ER
Leaking hydraulic oil can cause burns, fires,
falls (slipping), cuts, and puncture wounds (if
under high pressure). Do not tolerate
hydraulic oil leaks. They are dangerous.
Hydraulic oil leaks are easily visible and can
show up anyplace. Visually inspect the entire
machine for hydraulic oil. Check the ground
under the machine for leaked oil.
Check for loose fittings at the valve.
Pay particular attention to the cylinders, check to
see that there is no oil leaking from the seal, also
check all hoses that run to the cylinders.