Snorkel X33BE-sn10131+V-1 User Manual

Operator manual

Operator Manual

This first section of the Operator manual is the English language version.

(EN) Manual part number 508401-003-EN for serial numbers 10131 to current.

June 08 ( Rev C )

VERSION II

X27RT / X33RT

X27BE / X33BE

Diesel
Bi-Energy 24V DC

This manual is related to the following products:

X27BE-sn10131+V-1 X33RT-sn10131+V-1 X27RT-sn10131+V-1

Table of contents

Document Outline

Table of Contents
- Electrical Hazard
  - Electrical Hazard Warning i
  - Minimum Safe Approach Distance ii
    - Table 1 - (M.S.A.D.) ii
    - Figure 3 - (M.S.A.D.) ii
- Introduction
  - Standard SR3370 / SR2770 Version 2 iii
  - Options iii
  - Operation Manual iii
  - Photographs iii
  - Safety Alerts iii
  - Operation iv
  - Maintenance iv
  - Responsibilities of parties iv
  - Additional information v
- 1. Safety
  - Safe Operation 1-1
  - Electrocution Hazards 1-1
    - Minimum safe approach distance 1-1
  - Pre-start Inspection 1-1
  - Work Place Inspection and Practices 1-1
  - Operation 1-2
  - Tipover and Falling Hazards 1-3
  - General Safety Precautions 1-3
  - Hydraulic System Precautions 1-3
  - Fire Prevention 1-3
  - Engine and Fuel Handling Precautions 1-3
  - Batteries 1-4
  - Safety Decals and Placards 1-4
  - Safety Placards and Decals Location 1-5
- 2. Safety Devices
- 3. Specifications
- 4. Gauges
- 5. Automatic Shut-offs and Circuit Breakers
  - Automatic Shut-offs 5-1
  - Circuit Breakers 5-2
    - Main breaker 5-2
    - RCD / ELCB outlet (option) 5-2
- 6. Controls
- 7. Daily Inspection and Maintenance
- 8. Operation
- 9. Emergency Operation
- 10. Stowing and Transporting
  - Stowing 10-1
  - Transporting 10-2
- 11. Options
- 12. Fire Fighting and Chemical Containment
  - Hazardous Components 12-1
- 13. Operator's Troubleshooting
  - Troubleshooting 13-1
    - Operator Troubleshooting Chart 13-1
- Appendix A. Glossary
Index
- A
  - Additional information
    - Introduction - page iv, A-v
  - Automatic Shut-offs, 5-1
- C
  - Circuit Breakers, 5-2
    - Main Circuit Breaker, 5-2
    - RCD/ELCB Outlet, 5-2
  - Controls, 6-1
- E
  - Electrical
    - Electrocution, 8-1
  - Electrical Hazard Warning
    - see Electrical Hazard - page i
  - Emergency Operation, 9-1
    - Procedures
  - Engine
  - Engine Oil Charts, 3-3
    - D905-B, 3-3
    - WG750-G, 3-3
- G
- H
  - Hazardous Components, 12-1
- I
  - Insulation rating, 3-1, 3-2
- L
  - Lift time, 3-1, 3-2
- M
  - Maintenance personnel
    - see Introduction - page iv
  - Maximum rated axle capacity, 3-1, 3-2
  - Minimum Safe Approach Distance
    - see Electrical Hazard - page ii
- N
  - Nominal working height, 3-1, 3-2
- O
- P
  - Placards and decals
    - Inspection drawing, 7-11
    - Standard placards and decals, 7-10
  - Platform size, 3-1, 3-2
- Q
  - Qualified Operators
    - see Introduction - page iv
- R
  - Responsibilities of owners and users
    - Introduction - page iv, A-iv
- S
  - Safe working load (main deck), 3-1, 3-2
  - Safe working load (roll out deck), 3-1, 3-2
  - Safety
    - Batteries, 1-4
    - Electrocution Hazard, 1-1
    - Falling Hazard, 1-3
    - Fuel Handling Precautions, 1-3
    - General Safety Precautions, 1-3
    - Hydraulic Systems, 1-3
    - Pre-start Inspection, 1-1
    - Safe Operation, 1-1
    - Safety Decals, 1-4
    - Tipover Hazard, 1-3
    - Work Place Inspection and Practices, 1-1
  - Safety Alerts, Caution, Danger, Warning, Important
    - see Introduction - page iii
  - Safety Devices
  - Speed (maximum drive), 3-1, 3-2
  - Stowing The SR, 10-1
- T
- W
  - Warranty - Limited
    - see inside front cover
  - Weight, 3-1, 3-2
  - Work Place Inspection, 1-1
  - Working height, 3-1, 3-2