Snorkel X Series-sn15020-17279 - Manual (Page 12)

12 X-Series Work Platform
B Y T RUCK
1. Maneuver the work platform into transport position
and chock the wheels. The platform must be in the
fully lowered position for transport.
2. Secure the work platform to the transport vehicle
by attaching chains or straps of adequate load
capacity to the front and rear tie downs.
C A U T I O N ! !
Front tie down lugs are not to be used to lift work platform.
Overtightening of chains or straps attached to tie down lugs may result in
damage to the work platform.
Rear Tie Down/Lift Lugs
Front Tie Down Lugs
Lift Lugs
REAR Forklift Pockets
FRONT
Figure 8: Transporting the Work Platform