Snorkel SL30N Bi-Energy-sn11200+ - Manual (Page 2)

2
N EVER operate the machine without first surveying the work area for surface hazards such as holes, drop-offs, bumps
and debris.
N EVER operate the machine if all guardrails are not properly in place and secured with all fasteners properly torqued.
S ECURE and lock gate after mounting platform.
N EVER use ladders or scaffolding on the platform.
N EVER attach overhanging loads or increase platform size.
L OOK up, down and around for overhead obstructions and electrical conductors.
C HECK all four tires for correct inflation. See specifications.
D ISTRIBUTE all loads evenly on the platform. See the back cover for maximum platform load.
N EVER use damaged equipment. (Contact UpRight for instructions. See toll-free phone number on back cover.)
N EVER change operating or safety systems.
I NSPECT the machine thoroughly for cracked welds, loose hardware, hydraulic leaks, damaged control cable, loose
wire connections and wheel bolts.
N EVER climb down elevating assembly with the platform elevated.
N EVER perform service on machine while platform is elevated without blocking elevating assembly.
N EVER recharge battery near sparks or open flame; batteries that are being charged emit highly explosive hydrogen
gas.
A FTER U SE secure the work platform against unauthorized use by turning key switch off and removing key.
N EVER replace any component or part with anything other than original UpRight replacement parts without the manu-
facturer's consent.
NEVER operate the machine within
ten feet of power lines.
THIS MACHINE IS NOT INSULATED .
NEVER elevate or drive elevated on
uneven slopes or soft ground or ele-
vate the platform unless the platform
is level.
NEVER sit, stand or climb on guard-
rail or midrail.
Safety Rules
English Language Section