Addictive Desert Designs 2010 - 2014 Ford Raptor Fender Inner User Manual
Page 3
6. Find the three mounting tabs, starting from the large tab put into position and drill a 1/8" hole.
Use the self tapping screw to attach to the Fender Inner Frame. Once the tab is attached drill
the tabs with the 3/16" drill bit and attach the rivets with fender washers between from the
inside of the Fender Inner. Continue same procedure for the Medium and Small Tabs.
**Make sure the fender is
pushed into the wheel well
into the pinch weld as each
tab is attached.
7. Once all of the tabs are installed and riveted securely, install the Boatec Fenders according to
their instructions ensuring the Fender Inner is tucked under the Fender Edge. At this time there
may be some trimming necessary, use care in removing material to be sure the Fenders and
Liners fit together properly.