Addictive Desert Designs 2009 - 2013 F-150/Raptor Venom Chase Rack User Manual
Addictive desert designs
Addictive Desert Designs
2010 – 2013 Ford Raptor
Venom Chase Rack
Installation instructions
PREPARATION STEPS
1. Disconnect the negative terminal on the battery. With the vehicle on level ground and the
emergency brake set.
2. You will need the following tools:
a. 90’ drill
b. ½” drill bit
c. Ratchet
d. ¾” Socket
e. ¾” Wrench
f. Sharpie
g. Utility knife
3. Hardware Included:
a. 6– ½” x 1 ½” Bolts
b. 6 – ½” Nuts
c. 12 – ½” Flat washers
INSTALLATION INSTRUCTIONS
1. Place Venom Chase
Rack into position on
bed cap. Align front
edge of flat channel
to the plastic cover
piece as shown.