Addictive Desert Designs 2009 - 2013 F-150/Raptor Venom Side Step - Manual

Addictive Desert Designs
2010 – 2013 Ford Raptor
Venom Side Step
Installation instructions
PREPARATION STEPS
1. Disconnect the negative terminal on the battery. With the vehicle on level ground and the
emergency brake set.
2. You will need the following tools:
a. 13MM socket and ratchet
3. Hardware required:
a. 16 – 13mm Factory Bolts will be re-used for the installation
INSTALLATION INSTRUCTIONS
1. Remove factory Side Steps by removing the 16 – 13mm bolts (8 per side). Keep the Bolts as the
will be reused.
2. Attach the side Step back into the factory location, using the 8 – 13 mm Bolts per side. 4 forward
and 2 Rear.