Addictive Desert Designs 2007 - 2013 Jeep JK Stealth Fighter Front Bumper - Manual

Addictive Desert Designs
2007 – 2013 Jeep JK
Stealth Fighter Front Bumper
Installation instructions
PREPARATION STEPS
1. Set emergency brake.
2. You will need the following tools:
a. 3/4” socket
b. 7/16” socket
c. 5/8” wrench
d. 5/8” socket
e. 9/16” wrench
f. 7/32 allen wrench
g. 3/4" wrench
h. 19mm socket
i. ratchet or air gun
Note: This installation requires 2 people for best results
3. Included in Kit:
a. Stealth Fighter Front Bumper
i. Center Piece
ii. Side Pods
iii. Light Bar Hoop (light bar sold separately)
b. Hardware Kit