Addictive Desert Designs 2010 - 2014 Ford F150 / Raptor Transmission Cooler User Manual
Addictive Desert Designs For the car
![background image](/manuals/549586/1/background.png)
–
1. Disconnect the negative terminal on the battery. With the vehicle on level ground and the
emergency brake set.
2. You will need the following tools:
a. 3/4" Wrench
b. 3/4" Socket
c. 9/16" Wrench
d. 7/36" Allen Wrench
e. 7/16" Wrench
f. 7/16" socket
g. Ratchet
h. Adjustable Wrench
i. 1/2" Drill Bit
j. Dril
k. Teflon Tape
3. Included Items:
a. Aluminum Frame Mount Plates (2)
b. Aluminum Center Mount Plate (1)
c. Cooler Assembly with Dual Fans (1)
d. Painless Performance Fan Relay Wiring Kit - P/N 30102 (1)
e. -10 Port Plug with O-Ring to -8 AN Fitting (2)
f. -8 AN Black Push Lock Fitting (2)
g. -8 AN Black Push Lock high Pressure Hose (15 ft)
h. 3/4" Hose Clamp(4)
i. 3/8" Button Head Allen Bolts(4)
j. 3/8" Nylock nuts(4)
k. 3/8" Washers(8)
l. 1/4" x 1" Hex Head Bolt(6)
m. 1/4" Nylock nuts(6)
n. 1/4" Flat Washers(12)
o. 1/2" Hex Head Bolt(4)
p. 1/2" Hex Nut(4)
q. 1/2" Flat Washer(8)