Smittybilt 2740 I-Rack - Manual (Page 4)

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 W Artesia, Compton, CA 90220
Installation Instructions:
(Part # SB2740)
I-Rack
(Intelligent Racking System)
Revised 12.8.09
Gas Can Mounting Instructions:
Step 1: Choose the lower mounting holes that mount the gas can at your desired height. In-
stall the gas can lower mount (93-5771) to the I-Rack main body and secure using the sup-
plied 1/2” nuts and hardware. (Fig C)
Step 2: Assemble the upper mount by installing the 5 1/2” wing bolt (90-5763) through the
gas can retainer (90-5767) and threading it into the gas can upper mount (90-4251). (Fig C)
Step 3: Install the gas can to the lower mount. Secure the top of the gas can to the I-Rack
main body by installing the assembled upper mount onto the I-Rack main body and securing
it using the supplied 1/2” nuts and hardware. (Fig C)
Step 4: Use the 5 1/2” wing bolt (90-5763) to tighten the gas can retainer over the handle of
the gas can to secure it in place. (Fig C)
Step 5: Installation is now complete.
(Fig C)
Gas Can
90-5763 5 1/2”
Wing Bolt
90-5767 Gas
Can Retainer
93-5771
Gas Can
Lower
Mount
90-4251
Gas Can
Upper
Mount
1/2”
Hardware
Typical Installation