Smittybilt 761436 Tonneau Cover Extension - Manual (Page 2)

WWW.SMITTYBILT.COM
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Tonneau Cover Extension
(Part # 761435, 761436)
07-11 Jeep Unlimited (4-Door)
Step 4: If using extension in conjunction with windbreaker attach the extension to the windbreaker at
this time by connection the zippers. (Fig D)
Step 5:
Secure the front corners of the extension by connecting the hook on the rear of the front door
jam. (Fig E) Pull straps tight. Note: make sure strap goes between the seat belt and pillar.
Step 7:
Now secure the previously installed center straps by pulling snug.
(Fig E) (Fig F)
Step 8:
(Optional) If you want to add the snap connections to your tonneau, pull the flap on the
extension tight towards the back. Mark the locations of the snaps on the tonneau using chalk
or grease marker. Fold the flap back and install the included male snaps on the tonneau by
inserting the screw through the snap head and then through the tonneau. Secure with the
included acorn nuts. Once all are installed;snap the extension flap onto the tonneau. (Fig F)
Step 9:
Make sure all zippers and straps are secured. Installation is now complete.
INSTALLATION TIPS
1. It is recommended to install this part when temperatures are above 72 degrees F. The material can
contract an inch or more making it difficult to install, especially the first time. It is designed to be tight
to eliminate flapping.
2. Any wrinkles will eventually go away once the material is “relaxed”