Smittybilt 761436 Tonneau Cover Extension - Manual

WWW.SMITTYBILT.COM
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Tonneau Cover Extension
(Part # 761435, 761436)
07-11 Jeep Unlimited (4-Door)
NOTE:
Depending on what your vehicle is equipped with; remove your hardtop and or soft top including
entire bow assembly. It is also recommended to remove the softop pivot brackets that are installed
on the sport bar using a # 30 Torx. This part must be used in conjunction with Smittybilt Tonneau
Cover (Part# 7613xx)
Step 2:
Attach the rear of the extension to your tonneau by connecting the zippers. (The Rear of the
extension has snaps on it.) Fig A
Step 3:
Slide the two straps in the front center of the extension piece down under and through the inside
bracket of each front seat and secure with buckle. (Fig B, C) Do not fully tighten.
(Fig A) (Fig B)
(Fig C) (Fig D)
Read instructions entirely before attempting to install this product.
Slide the
two long
middle
straps
down
under and
through
the inside
bracket of
the front
seats.