Smittybilt FN1990-S4 Sure Steps - Manual (Page 3)

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Page 3 of 6
Installation Instructions
Sure Step
(Part #FN1990-S4B/FN1990-S4S)
09 Ford F-150 Super Crew
Driver Side Installation Pictured
Driver Side Installation Pictured
Insert the Nut and Bolt Plate into
this square hole and line up the nut
with the round hole. Thread the
plastic retainer only part way down
the threaded end of the bolt. On
passenger side installation, remove
the ground strap for access.
Replace after Bracket installation
Remove these two
hex bolts, metal clips
and the plastic pin.
Drill a 3/8" hole
through the pinch
weld to clearance
holes if necessary
Fig 2 Fig 1A
Fig 1B
Hold the Bracket at an
angle. Insert the top of
the Bracket between this
lip on the body and the
body mount. Line up the
threaded Nut and Bolt
Plate with the T-Slot in
the Bracket
Hold Bracket in place on
top of this lip on the body
Fig 3
Front