BOXLIGHT CP-14t - Manual (Page 30)

30
VIDEO MODE
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select Video and press
the SELECT button.
SELECTING VIDEO MODE
Direct Operation
Select VIDEO mode by pressing the MODE button on the Top Control
or the Remote Control Unit.
Menu Operation
SELECTING COLOR SYSTEM
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select SYSTEM and
press the SELECT button. Another dialog box VIDEO SYSTEM
Menu will appear. (The display also appears by pressing the
SYSTEM button on the Top Control or the Remote Control Unit.)
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to "Auto", and then press the SELECT button.
1
2
The projector automatically detects the incoming Video system, and
adjusts itself to optimize its performance.
When the Video System is PAL-M select the system manually.
Auto
If the projector cannot reproduce the proper video image, it is
required to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, or PAL-M.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M
This box indicates
the system being
selected.
Video
Computer