Synergy 8554 - 94-02 Dodge Truck Track-Bar Conversion Bracket - Manual (Page 2)

2) Next, lift the vehicle up so the suspension can hang free, support it securely using Jack stands.
3) Once the vehicle is in the air and safely supported, remove the frame side bolt on the factory TB.
4) Next, inspect the underside of the frame side factory TB mount. Some models have a weld that will
inhibit the new TB bracket from sitting flat on the surface. If your truck’s bracket looks like picture 4.1a
& b below, follow instructions in step 5. If your truck’s bracket looks like picture 4.2 below, continue
on to step 6.