Synergy 8091 - Jeep JK Front Track Bar Bracket (RHD) - Manual (Page 6)

8. Once all the hardware is installed in the track bar relocation bracket you can begin to
torque all the hardware. Torque the 9/16 bolt to 150 ft-lbs (200 N-m), the ½” bolt to
90 ft-lbs (120 N-m) , and the 3/8” U-bolt nuts to 30 ft-lbs (40 N-m) .
9. The anti-sway bar relocation bracket works in conjunction with the track bar
relocation bracket to raise the anti-sway bar mounts by 2”. This is required when
using the Poly Performance sway bar disconnect kit and/or using the Poly
Performance Sway bar link kit. If you are relocating the anti-sway bar link mounts
refer to step 9 & 10. If you want to keep the anti-sway bar links in the stock location,
skip step 9&10 and refer to step 11.
10. Attach the passenger side sway bar link to the upper hole in the track bar relocation
bracket using the stock bolt and nut.