Synergy 8091 - Jeep JK Front Track Bar Bracket (RHD) - Manual (Page 11)

16. Reattach the track bar using the factory nut and bolt, it helps to have someone turn the
steering wheel to align the track bar to the hole in the bracket. Torque the factory
track bar bolts to 125 ft-lbs
(170 N-m). Remember to tighten the track bar frame
mount bolt if you loosened it earlier.
17. You will probably have to re-center the steering wheel. Adjust the draglink to center
the steering wheel. If the steering wheel is not centered the ESP light will come on,
so make sure you adjust the draglink so the steering wheel is perfectly centered. This
can be accomplished by test driving and making the necessary adjustments. When
driving in a straight line take note of which way the steering wheel need to turn to be
centered. If the steering wheel needs to turn right to be centered, shorten the draglink.
If the steering wheel needs to turn left to be centered, lengthen the draglink.