Lukas MSM-2D mobile control module - Manual (Page 5)

5
In the event of malfunctions,
shut down the device
immediately and secure it. You
should have the malfunction
repaired immediately.
Do not make any changes
(add-ons or conversions) on the
device without the approval of
LUKAS.
Heed all safety instructions
and hazard warnings on the
device and in the operating
instructions.
All safety instructions and
hazard warnings on the device
are to be kept intact and in a
legible condition.
Make sure that all safety covers
are present on the device and
in proper working condition.
Safety equipment must never
be disabled!
Before switching on/engaging
the device or while operating
the device, it must be ensured
that no one is endangered by
the operation of the device.
The maximum permissible
operating pressure must not be
changed.
Prevent electrostatic discharge,
which has the possible
consequence of spark
formation, when handling the
device.
Observe all intervals that
are prescribed or specified
in the operating instructions
for recurring tests and/or
inspections.
When working in the vicinity
of live components and lines,
take appropriate measures for
preventing current transfers or
high voltage flashovers to the
device.
Use only original LUKAS
accessories and spare parts for
repairs.
Make sure that you do not get
caught in the hose or cable
loops and trip when working
with or transport the device.
The device is filled with
hydraulic fluid. These hydraulic
fluids can be detrimental to
health if they are swallowed
or their vapours are inhaled.
Direct contact with the skin
should be avoided for the same
reason. Also, when handling
hydraulic fluids, note that they
can negatively affect biological
systems.
When operating and/or storing
the device, make sure that the
function and the safety of the
device are not impaired by
strong external temperature
differences or that the device is
damaged. Keep in mind that the
device can also heat up when it
is used continuously.