Lukas MSM-2D mobile control module - Manual (Page 20)

20
If the defects cannot be remedied, notify an authorised LUKAS dealer or contact LUKAS
Customer Service directly!
The address of LUKAS customer service is:
LUKAS
Hydraulik GmbH
Weinstraße 39, D-91058 Erlangen
Postfach 2560, D-91013 Erlangen
Phone: (+49) 09131 / 698 - 348
Fax.: (+49) 09131 / 698 - 353
In the case of a
quick-disconnect
coupling system:
Hose lines cannot be
connected
Is the pump
running?
They are under
pressure
Relieve pump
pressure
Coupling defective Coupling should be
replaced immediately
Hydraulic fluid
escaping from the
hoses or at the joints
Are the hose lines
defective?
Leakage, possible
damage
Replace hoses
Damage on the
surface of the
hydraulic hoses
Mechanical damage
or contact with
aggressive media
Replace hoses
Leakage at the
couplings
Coupling
damaged?
Coupling defective Coupling should be
replaced immediately
Because all values are subject to tolerances, there may be small differences between the
data of your device and the data of the following tables!
Technical data 11.
* 1 MPa = 10 bar
Type MSM-2D PN500-STREAM
Ref. No. 119006000 179006000
Dimensions
l x w x h
[mm] 330 x 180 x 270
[in.] 12.99 x 7.09 x 10.63
Weight
(including hydraulic fluid
filling)
[kg] 5,8 6,0
[lbs.] 12.8 13.2
max. operating pressure
(pump - mobile selection
manifold)
[MPa]* 70
[psi.] 10,153
max. operating pressure
(mobile selection manifold -
cylinder)
[MPa]* 50
[psi.] 7,252
Coupling system
(to the unit)
quick-disconnect
coupling
monocoupling