Lukas SC 357 E2 - Manual (Page 25)

25
9.2 Preventive service
9.2.1 Care instructions
The outside of the device should be cleaned with a damp cloth from time to time (not the
electrical contacts in the connection slot, on the battery and on the power supply
). In
addition, the metal surfaces are to coated with a suitable medium to counteract corrosion (not
the electrical contacts in the connection slot, on the battery
and on the power supply).
(In case of doubt, contact your authorized LUKAS dealer or LUKAS directly!)
9.2.2 Function and load test
If there is any doubt regarding the safety or reliability of a device, a function and stress test
must also be performed.
LUKAS offers appropriate test equipment for this.
9.3.1 Replacing the blade, protective cover and hand grip of the
S 700 E2 cutter
9.3 Repairs
Components to be
replaced
Required work steps
Protective cover 1., 2. and 7.
Pivot bolt 1. - 4. and 7.
Handle 1. - 5. and 7.
Blade 1. - 6. and 7.