Lukas SC 357 E2 - Manual (Page 18)

18
Working surface is too small,
tips slip off.
Only for increasing the size
of a gap (not suitable for
spreading)
Tips get a safe grip. Work with the tips only.
Do not damage the
spreader arms!
6.4 Pulling
(spreader, combination devices)
WARNING / CAUTION / PLEASE NOTE!
The light metal alloy spreader or combination arms may not be damaged.
- LUKAS chain sets must be used for pulling.
- When using a chain for pulling, make sure that the pins and hooks are positioned correctly
so that the chain cannot slip.
- Only chain sets in perfect condition may be used.
- The pulling chains must be checked by an expert at least once a year.
- Also consult the separate operating instructions for the corresponding chain set!
Attachment hole
for chain sets