For wired network interface cable users, Step 2, Installing the printer driver – Brother HL-2170W User Manual

Page 34: Macintosh

Installing the Printer Driver

STEP 2

Macintosh

acint

osh

Wired

Network

For wired network interface cable users

Connecting the printer to your Macintosh

and

installing the driver

Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.

Make sure the printer power switch is on.

Turn on your Macintosh

. Put the supplied CD-

ROM into your CD-ROM drive.

Double-click the HL2100 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.

Click Install Printer Driver on the menu
screen.

Click Network cable users and follow the
on-screen instructions. Then, restart your
Macintosh

For Mac OS

X 10.2.4 to 10.2.8 users:

Go to step

For Mac OS

X 10.3 or greater users:

Go to step

The Brother software will search for the Brother
printer. During this time the following screen
will appear.

Note

If more than one printer is available, the following
list appears. Choose the printer you wish to
connect, and then click OK.

• If there is more than one of the same printer

model connected on your network, the
Ethernet address (MAC address) will be
displayed after the model name.

• You can find your printer’s Ethernet address