Brother HL-2170W - Manual (Page 10)

Getting Started
8
3
Printer LED Indications
1 The LED will blink in a pattern of ON for 1 second and then OFF for 1 second.
2 The LED will blink in a pattern of ON for 0.5 seconds and then OFF for 0.5 seconds.
3 The yellow LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds.
1 The LED will blink (turn on for 0.2 seconds and off for 0.1 second).
2 The LED will turn on for 5 minutes.
3 The LED will blink (turn on for 0.1 second and off for 0.1 second) for 30 seconds.
4 The LED will flash 10 times and then turn OFF for half a second. This pattern will repeat 20 times.
: Blinking
: ON : OFF
Printer LED OFF Sleep Warming up
Cooling down 1
Ready Receiving
data 2
Print Data
remaining 2
Toner
Drum
Error
Ready
(Blue)
Dimmed
Printer LED
Toner low 3 Toner life
end
Drum near
end of life
3
Cover open
Paper jam
2
No paper
Drum Error 2 Service
call
2
Toner
(Yellow)
Drum
(Yellow)
Error
(Red)
Ready
(Blue)
User's Guide
Chapter 5 Chapter 5 Chapter 5 Chapter 6 Chapter 6 Chapter 4 Chapter 4
LED indications when using the one-push wireless setting mode
Printer
LED
Searching or
accessing the access
point 1
Connecting and
downloading settings
from the access point 1
Connection
succeeded
2
Connection
failed
3
Session overlap is
detected
4
Toner
(Yellow)
Drum
(Yellow)
Error
(Red)
Ready
(Blue)