beautypg.com

Apple Xserve (Early 2008) DIY Procedure for Xserve RAID Card Battery User Manual

Page 15

background image

073-1151 Rev. B

15

© 2007, 2008 Apple Inc. All rights reserved.

Tighten the five Phillips screws that fasten the airflow duct to the fan array, in the order

3.

shown, to prevent the duct from warping. Do not overtighten the screws.

Replacing the Power Distribution Board Cable

Connect the power distribution board cable to its connectors on the drive interconnect
backplane and the power distribution board.

Replacing the Power Supplies

Slide the first power supply all the way into the bay, and then press the handle to seat it and

1.

lock it in place.

Repeat for the second power supply, if installed.

2.

Slide the power supply in and
press the handle to seat it.

Replacing the Apple Drive Modules

Slide the first Apple drive module into its bay until it is firmly seated. Then press the handle

1.

in flush with the front panel.

Repeat for all other installed drive modules.

2.