Apple Boot Camp (Mac OS X v10.5 Leopard) User Manual
Page 24
24
If you can’t adjust the brightness of your display
You can adjust the brightness of Mac portable computer displays using function keys
on the keyboard. Press the F1 key to dim the display, or the F2 key to brighten it. Or, if
you have an Apple keyboard with brightness symbols on the F1 and F2 keys, you can
use them.
If the brightness keys don’t appear to work, try pressing and holding the Fn key while
pressing the F1 or F2 key. If that doesn’t work, make sure you’ve installed the Boot
Camp drivers. See “Step 3: Install the Boot Camp Drivers for Windows” on page 12.
If you can’t adjust the sound volume
You can adjust the sound volume in Windows by using the volume keys on your Apple
keyboard. Press Volume Down (–) to lower the volume or Volume Up (-) to increase it.
To mute the volume, press Mute (—).
If the volume keys don’t appear to work, make sure you’ve installed the Boot Camp
drivers. See “Step 3: Install the Boot Camp Drivers for Windows” on page 12.
If the Windows desktop doesn’t fill the entire screen
If the Windows desktop doesn’t fill the entire screen, make sure you’ve installed the
Boot Camp drivers. See “Step 3: Install the Boot Camp Drivers for Windows” on
page 12.
If you installed the drivers and the desktop still doesn’t fill the entire screen, increase
the desktop resolution setting in the Display control panel.
If the screen is blank or distorted
Some graphics cards may not work with both Mac OS X and Windows on a Mac
computer. If you’re having trouble with your screen display when using Windows, try
the following:
 Use the graphics card that came with your Mac.
 Make sure you’ve installed the Boot Camp drivers. See “Step 3: Install the Boot Camp
Drivers for Windows” on page 12.
 Adjust the screen resolution setting in the Display control panel.
If you can’t rename the Windows partition
If you installed Windows XP on an NTFS partition, or you installed Windows Vista, you
can only rename the Windows partition in Windows. Start up in Windows and right-
click the C: drive in Windows Explorer. Then type a name.
If you have a RAID configuration
RAID configurations using Boot Camp are not supported. For more information, go to
www.apple.com/support/bootcamp and search for “RAID.”