Apple PowerBook Duo Dock (including Duo Dock Plus) - Manual (Page 24)

You can connect the Duo Dock Plus to one or more computers with an Apple
Ethernet connector and any standard Ethernet cable.
To set up your Duo Dock Plus (or upgraded Duo Dock) to use Ethernet,
you must
m connect the dock to the Ethernet network
m check that you have the Ethernet software installed on your PowerBook
Duo, and install the software, if you do not. See “Checking Your
Networking Software” in the section “Connecting Your Duo Dock to
Ethernet” later in this chapter.
m open the Network control panel and select Ethernet as the network you
want to use
After setting up your dock, you may need to contact your network
administrator for additional information.
Attach an Ethernet transceiver to
the Ethernet port on the Duo Dock.
Ethernet transceivers
18 Chapter 2