Apple PowerBook (3400 series) - Manual (Page 54)

If you can’t eject a card
If you are unable to eject a card, follow these steps:
1 Straighten one end of a paper clip.
2 Insert the end of the straightened paper clip into the hole next to the slot that contains
the card, and press gently but firmly until the card is ejected.
3 Pull the card out of the slot.
Setting the computer not to eject storage PC Cards at startup
If a you have a storage PC Card, such as an SRAM card or an ATA hard disk,
in either slot, the card will be ejected when the computer starts up. To prevent
excessive wear on PC Card connectors and slots, you can use the Startup Disk
control panel to keep storage PC Cards from ejecting when you turn on the
computer. (Other types of PC Cards, such as a modem or Ethernet card, are
not ejected at startup.)
If you can’t eject a card, insert
the end of a straightened paper
clip into the hole next to the slot.
This hole is for the upper slot.
This hole is for the lower slot.
54 Chapter 3