Apple PowerBook (3400 series) - Manual (Page 129)

To do a clean installation, follow these steps:
1 Start up your computer from the Disk Tools disk or the CD that came with your computer
(by pressing
x
-C with the CD in the drive as the computer starts up).
2 Find and open the Disk First Aid icon.
After Disk First Aid starts, follow the instructions on the screen. Disk First
Aid checks your hard disk for any problems.
3 When Disk First Aid has finished checking your hard disk, choose Quit from the
File menu.
4 Open the Drive Setup program.
You use the Drive Setup program to update your hard disk.
5 In the list of drives, click your startup disk.
6 Open the Functions menu and choose Update Driver.
7 When the update process is finished, quit Drive Setup.
8 Shut down your computer.
9 Start up your computer from the first system software installer disk that you made with
the Floppy Disk Maker application.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
129 Diagnostic Techniques