Apple Macintosh Cyrillic Language Kit - Manual (Page 13)

A-10
Creating a Roman Language Register
If you register a program for Cyrillic by accident, you can change it
back to your computer’s primary language by following these
steps:
1. Open the Cyrillic Language Register.
2. Pull down the Language menu.
3. Choose English.
4. Click OK.
Your Cyrillic Language Register changes to a Roman Language
Register. You can now use it to re-register programs as Roman.
v Hint: As a convenience, you can create additional language
registers for any of the languages installed on your system,
then use the short-cut method described at left to register
your programs. v
Chapter 3: Choosing a Language for Your Application Program
3. Select the application program you want to register.
4. Click the Register button.
Now you can open your program and begin working.
v Tip: You can use a short-cut method to register your
programs. If the program you want to register is open,
quit it. Then drag the program’s icon to the icon for the
Cyrillic Language Register. When the Language Register
icon is highlighted, release the mouse button. A message
confirms that the program is registered. v
If the program
you want to
register is not
listed, use this
menu to see
files in other
folders.
Click the program you
want to register.