Apple Macintosh Cyrillic Language Kit - Manual (Page 10)

A-7
7. Click to select the items you want to remove.
8. Click Remove.
There is a short wait while the files are removed.
9. If you see a message telling you to restart your
computer, click Restart.
The Cyrillic Language Kit is not removed until you restart your
computer.
v Note: If your language kit was installed on a disk different
from your startup disk, you will only be asked to quit the
Installer application. v
1. Quit any open application programs.
If you have any virus-detection software, turn it off.
v Note: It’s best to start your computer with all extensions
turned off before doing the removal. To do so, hold the Shift
key down while your computer is starting. v
2. Insert the Install 1, English disk into your floppy drive
(or insert the Macintosh Cyrillic Language Kit CD disc
into your CD-ROM drive).
You should see the Installer icon in the Install 1, English disk’s
window.
3. Open the Installer by double-clicking its icon.
A welcome screen appears.
4. Click Continue.
The Install dialog box appears.
5. Press the pop-up menu at the upper-left corner of the
dialog box and choose Custom Remove.
6. Make sure that the disk named is the one from which
you want to remove your Cyrillic language software.
If the wrong disk name appears, click Switch Disk until you
see the name of the correct disk. Make sure this is the name
of the disk where the
language kit is installed. Click here to
switch to a
different disk.
Click the checkbox
of the items you
want to remove.
Click here to remove
the selected files.
Press this pop-up
menu and choose
Custom Remove.
Chapter 2: Setting Up