Apple ColorSync Display - Manual (Page 43)

Installing ColorSync Display setup information for Windows
On Windows systems, new devices are automatically detected when they
are connected to your computer (if it is VESA DDC compliant). If you are
not using Windows, see the manual that came with your video card for
setup information.
To determine that Windows has correctly identified your monitor, check
Monitor Type in the Display Properties dialog box. Performing this check
will ensure that the ColorSync Display setup information has been installed.
Not installing the setup information may limit the resolution and refresh rates
on your monitor.
To correctly identify the monitor type in your computer, follow these steps:
1 Open the Start menu and choose Settings.
2 Open the Control Panel and double-click the Display icon.
The Display Properties dialog box appears.
3 Click the Settings tab at the top of the dialog box.
The Settings property sheet appears.
4 Click the Change Display Type button in the lower-right corner to display the current
Monitor Type.
If the Monitor Type shown is the ColorSync Display, your computer has
correctly identified your monitor. Go to the next section, “Screen Controls at
a Glance.”
If the Monitor Type shown is not the ColorSync Display, continue with step 5.
5 Click the Change button next to the Monitor Type field; then select ColorSync Display
and click OK.
If the ColorSync Display is not one of the devices displayed, then the setup
information file needs to be installed.
36 Chapter 3