Apple ColorSync Display - Manual (Page 10)

For your own safety and that of your equipment, always take the
following precautions.
Disconnect the monitor’s power plug (by pulling the plug, not the cord) if any
of the following conditions exists:
m the power cord or plug becomes frayed or otherwise damaged
m you spill something into the case
m your monitor is exposed to rain or any other excess moisture
m your monitor has been dropped or the case has been otherwise damaged
m you suspect that your monitor needs service or repair
m you want to clean the case (use only the recommended procedure
described in “Care and Cleaning” in Chapter 4)
IMPORTANT The only way to disconnect power completely is to unplug the
monitor’s power cord. Make sure at least one end of the power cord is within
easy reach so that you can unplug the monitor when you need to.
Be sure that you always:
m Keep your monitor away from sources of liquids, such as washbasins,
bathtubs, shower stalls, beverages, and so on.
m Avoid setting anything on top of the monitor (such as a book or cup). The
monitor could overheat and be damaged.
m Keep the monitor’s vents free from obstruction.
m Protect your monitor from dampness or wet weather, such as rain, snow,
and so on.
m Read all the installation instructions carefully before you plug your
monitor into a power source.
m Keep these instructions handy for reference by you and others.
m Follow all instructions and warnings dealing with your system.
WARNING Never remove the cover from the monitor or you may come in
contact with hazardous voltage levels capable of causing serious injury
and possibly death.
2 Chapter 1