Apple Xserve RAID: Using RAID 1.2 Admin and Disk Utility - Manual (Page 28)

28 Chapter 3 Monitoring Status and Changing Settings
Note: On Xserve RAID systems, the World Wide Node Name (WWNN) and the World
Wide Port Name (WWPN) are the same for each controller. The World Wide Name
field shows both the WWNN and the WWPN. The Xserve RAID WWPN (shown in RAID
Admin) identifies the target device and is not for use in LUN Masking. See “Masking
RAID Volumes on Multiple Host Systems (LUN Masking)” on page 39 for information
about LUN masking and WWPN.
• Network displays the IP address and related network details for each RAID controller.
• Events displays a list of events that have occurred for both RAID controllers, in
chronological order. Each event has a color symbol indicating the severity, a time
stamp, and a description.