Apple Power Macintosh 8500/120 Series - Manual (Page 67)

2 Attach one end of the video cable to the Video In port on the VCR.
Follow the directions that came with the VCR.
3 Plug the other end of the video cable into either the S-video output port ( Æ ) or the
composite video output port ( Â ) on the Macintosh.
If the connector doesn’t slide easily into the port, realign it and try again.
Don’t use force, which could damage the computer or cable.
4 Plug the dual RCA plugs on the audio cable into the left and right Audio In ports on
the VCR.
5 Plug the RCA connectors on the audio cable into the left and right audio input ports ( - )
on the Macintosh.
Depending on whether your equipment has S-video or composite video
(RCA-type) ports, your finished connections should look like one of the
following:
S-video connection for output from the computer
S-video output
port
Audio output
ports
(left and right)
S-video In
port
Audio In ports
(left and right)
Dual RCA-plug cable
(available at most electronics supply stores)
VCR
Æ -
S-video cable
55 Connecting Additional Equipment