JB Conversions 16-1204 HD Standard Length SYE Kit for the NP241 - Manual (Page 2)

2
Applications:
• Use for installing Dodge NP241 into Jeep TJ, YJ, XJ with
original Jeep speedometer
• Install in existing Dodge NP241 (truck) with transfer case
mounted speedo pickup
• Use for installing Chevy NP241 into Jeep TJ, YJ, XJ
requiring Jeep style speedometer
• Install in existing Chevy NP241 (truck) with mechanical
speedometer (driver's side F/O)
• Use for installing Chevy or Dodge NP241 into custom
chassis requiring mechanical speedo cable hookup
• Kit includes new HD 32-spline output shaft and rear
bearing housing
• This kit will not work on the NP241DHD with PTO cover.
Installation Instructions
Note: This kit can be installed without removing the transfer case
from the vehicle however it is recommended that the unit be removed
to ease installation of the SYE kit.
1) Drain the fluid from the transfer case. This kit can be installed while
the transfer case remains in the vehicle however, removal is
recommended for an easier installation.
2) Remove the 10mm bolts (4) holding the tail cone onto the bearing
housing (Fig.1).