JB Conversions 16-1204 HD Standard Length SYE Kit for the NP241 - Manual (Page 13)

13
22) Install the mode fork spring. Verify the magnet is in place
(Fig.23,24).
FIG: 23 FIG: 24
23) Verify the O-ring is in place within the pump (Fig.25). Orient the
pump and pickup tube into the rear case as shown (Fig.26).
FIG: 25 FIG: 26
24) Apply a thin bead of RTV sealant to the rear case half and install
the rear case/pump assembly (Fig.27).