Class1 Throttle Information Reference - Manual (Page 3)

3 e:\manuals\throttles\LDSBBT.p65
Interlocks
NOTE:
The interlock schemes shown in this manual are examples only and may not be suitable for specific
applications.
Special Programming
Some ECMs require programming for remote throttle operation and several considerations including
vehicle speed and max RPM may need to be configured. The latest information should be available
from the manufacturer’s dealer network system.
Class1 provides a variety of engine controls that are used in a broad range
of applications, therefore it is impossible for Class1 to determine the suitabil-
ity of a particular control for any specific application. The flexibility of our
products allows them to be used in a limitless number of custom applications.
Class1 can advise you of the features that are available on a given product
so that you can determine what product will meet your needs. We believe
that the Original Equipment Manufacturer’s (OEM) engineering departments
are qualified experts in their product field and are the authorities on product
application and safety. Since our products are typically used in safety critical
applications, the OEM must undertake appropriate testing to prevent injury to
the end user.
WARNING
!
IT IS THE PURCHASER’S RESPONSIBILITY TO DETERMINE
THE SUITABILITY OF ANY PRODUCT FOR AN INTENDED
APPLICATION, AND TO INSURE THAT IT IS INSTALLED
AND GUARDED IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE, LOCAL AND NFPA SAFETY AND HEALTH
REGULATIONS, CODES AND STANDARDS.