beautypg.com

Class1 Intelli Tank level display with drip empty User Manual

Page 3

background image

Intelli-Tank Manual (106759)092204

– 3 –

Class 1

When the unit is first powered up the LEDs will cycle on individually starting with the
bottom LED (LED 1) and then the LEDs will show current status.

A Master unit properly connected to a functioning transducer will display current

tank level information.

A Master unit not connected to a pressure transducer will alternately flash the

bottom two LEDs.

A Remote unit connected to a Master unit (through the 1-wire data line) will

mimic the Master unit’s LED condition and flash rate.

A Remote unit not connected to a Master unit will alternately flash the upper two

LEDs and the lower two LEDs. This indicates a “no data” condition.

Level indications: