Rock-Slide Engineering JEEP JK2 STEP SLIDER - Manual (Page 9)

Installation Instruction RSEI 107
TROUBLE SHOOTING/FRICTION POINTS
 The slider is powered by the Jeep’s battery when engine is off and powered by the Jeep’s
engine while the vehicle is running. This will cause the slider to operate at different
speeds depending on the Jeep engine is running or not.
 If you feel the slider is sticking at certain points or the motor is stressing it may be
possible a friction point has developed during the install due to a variance in the slider
or Jeep construction.
o To identify a friction point that may be stressing the slider motor, look at the
slider from outside the jeep and open and shut the Jeep door a couple of times
and study the way the slider operates. Look at the slider for wear in the powder
coating. The slider leaves our manufacturing facility with a perfect powder
coating so if you see a spot on the slider that has scratches or the powder coating
shows a blemish; that’s a good indication of a friction point. Using a file or other
grinding tool to smooth over a small area on the slider can alleviate this
problem.
Thank you for choosing Rock-Slide Engineering products. We value your business and
welcome your feedback/suggestions. If you have any concerns please contact us directly @
435-752-4580. We are here to help you!