SkyTrak 8042 Operation Manual - Manual (Page 127)

General Maintenance
125 Model 8042 Rev. 11/03
C. Replace In-line Fuel Strainer
1. Unlock and open the right engine access door.
2. The in-line fuel strainer (3) is located down line from the engines lift
pump (4). Loosen the two hose clamps (5) that secure the strainer
in place.
3. Remove the old in-line fuel strainer and dispose of properly.
4. Install the new in-line fuel strainer with arrow (6) pointing toward the
lift pump.
5. Assemble the hoses to the in-line fuel strainer and tighten the hose
clamps.
6. Remove air from the fuel system (see “Bleeding Fuel System” on
page 126).
7. Close and lock the right engine access door.
500
OT1150
OH3460
5
6
4
3
5