SkyTrak 8042 Operation Manual - Manual (Page 102)

100 Model 8042 Rev. 11/03
Emergency Operations
12. Tilt the carriage and/or attachment upward if necessary for clear-
ance before retracting the boom.
13. SLOWLY RETRACT the boom.
14. SLOWLY LOWER the boom and ground the carriage.
15. Completely remove the load from the carriage and/or attachment if
you haven’t already done so.
16. Have the vehicle serviced immediately.
17. Replace any faulty hydraulic lines.
18. Return to the cab, fasten your seat belt and start the engine.
19. Cycle the lift cylinder several times to bleed air from the system.
Check for leaks.
20. Transfer the waste oil to a container with a cover and label as used
oil. Dispose of properly.
21. Recheck the hydraulic oil level. Add oil if necessary.