BNC 835-3 User Manual - Manual (Page 29)

List Sweep Submenu
After accessing the List Sweep submenu , the first of total two displays allow to enter
start and stop power by using the
→ ← keys to select the digits and using the rotary
knob to increase and decrease their values. Use the ↓ ↑ arrow to move between the
several displays that contain settable sweep parameters. On the first display the number
of repetitions of the list can be entered, and the ALC can be set on or off.
On the second display, a particular list can be selected from the flash memory of the
device.
Start the sweep by pressing the RF On/Off button . The submenu can always been
exited (without starting the sweep) by pressing the menu key.
Repetition
ALC on/off
Figure 20 Displays shown for the list sweep configuration
29