BNC 835-3 User Manual - Manual (Page 28)

Power Sweep Submenu
After accessing the Power Sweep menu, the first of total three displays allow to enter
start and stop power by using the
→ ← keys to select the digits and using the rotary
knob to increase and decrease their values. Use the ↓ ↑ arrow to move between the
several displays that contain settable sweep parameters. On the second display, the
number of points, and the on and off time can be entered. On the third display, select
the repetition mode between INFinite, and 1 (single repetition).
Start the sweep by pressing the RF On/Off button . The submenu can always
been exited (without starting the sweep) by pressing the menu key .
Number of Points per Sweep
On (dwell) time
Off time
Repetition
ALC on/off
Figure 19 Displays shown for the power sweep configuration
28